PDF
Print
E-mail

 

 

Markable garments
   
    Markable garments
 

The personalization of a standard garment allows you to obtain a professional clothing adapted to the needs of the wearer, of the company or of the customers, while promoting your image and to reinforce the feeling of belonging to the company.

In order to meet these needs, all the models you find in this catalogue are markable.

Attention for the respectace of the classes: it is recommended to retest a hi-viz garment once it has been marked.

 
    Marking techniques
 
 

• Embroidery

Embroidery offers the most solid and prestigious personalization. Today, it’s guided by computer and therefore necessary to create a embroidery programme. The modern machines allow to embroider with up to 12 different colours on a same logo. The result is superb, indelible and enriches with high-class your support.

It can be used on any textile support, but must have an opening in the lining in order to obtain a better result. Do however be careful with waterproof garments.

   
 

• Silk screen printing

Direct printing with one or several colours. The ink is applied through a silkscreen with a sort of scraper. One screen per colour or per design is used with this technique.

On dark supports, it is often necessary to apply a white colour first (which implies a supplementary colour).

The printing ink can also be special: ”swollen” for a marking in relief, or photo luminous to be visible in dark. It’s the oldest and most used amongst the personalization techniques.

For small series, this technique is abandoned for the benefit of embroidery which, thanks to computers, has become very performant. Can be applied on a huge number of textile supports.

   
 

• Indirect digital textile printing

The logo, even in several colours, is printed on a support “special transfer” either by silkscreen printing or by reprography process (laser). This support is applied on the object by a hot press. This process it mostly used on a clear coloured support (white, off-white or beige).

Many applications are possible, as long as the support resists to the application temperature (around 160°C during 15 seconds depending on the support). Ideal process for small series or when complex four-colour printing process will not allow a direct application on the support.

   
 

Remark: Always valid the marking possibilities of each model and get realized a test-marking before launching the series.

   
 

  MARKING OF GARMENTS NOT MADE BY OUR COMPANY